DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Kısa Açıklama:

Altıgen Flanş Somunları, bir ucuna yakın geniş bir flanş kısmı bulunan ve entegre dönmeyen bir rondela görevi gören altıgen somunlardır. Flanş somunları, somuna binen yükü daha geniş bir yüzey alanına yaymak ve montaj malzemesine zarar gelmesini önlemek için kullanılır. Tırtıklı veya tırtıksız stillerde olabilirler.

ŞİMDİ İLETİŞİME GEÇİN pdf olarak indir

Ürün Detayı

Ürün Etiketleri

Ürün kataloğu

Ürün	Flange nut
Sona ermek	Plain, zinc plated, black, HDG, etc.
Measurement system	Metrik, Emperyal (İnç)
Başvuru	Heavy Industry, Water Treatment, General Industry
Menşe Yeri	Yongnian, Hebei,China
Brand Name	TYB
Standart	DIN 6923
Boyut	M5-M20
Malzeme	Karbon çeliği
Tolerance	4H
Tip	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Standart

Flange nut04

Boyut	m	S	Dc	Ağırlık
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.