DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Mubo nga Deskripsyon:

Ang Hex Flange Nuts mga hex nuts nga adunay lapad nga flange nga bahin duol sa usa ka tumoy nga naglihok isip usa ka integrated non-spinning washer. Ang mga flange nuts gigamit aron ipakaylap ang load nga gibutang sa nut sa mas lapad nga lugar aron malikayan ang kadaot sa materyal sa pag-instalar. Mahimo kini nga adunay mga serrated o non-serrated nga mga estilo.

KONTAK KARON i-down load sa pdf

Detalye sa Produkto

Mga Tag sa Produkto

Katalogo sa produkto

produkto	Flange nut
Paghuman	Plain, zinc plated, black, HDG, etc.
Measurement system	Sukatan, Imperial (pulgada)
Aplikasyon	Heavy Industry, Water Treatment, General Industry
Dapit sa Sinugdanan	Yongnian, Hebei,China
Brand Name	TYB
Estandard	DIN 6923
Gidak-on	M5-M20
Materyal	Carbon steel
Tolerance	4H
Type	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Estandard

Flange nut04

Gidak-on	m	S	Dc	Timbang
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.