DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Nkọwa dị mkpirikpi:

Mkpụrụ Hex Flange bụ mkpụrụ hex nwere akụkụ flange sara mbara dị nso na njedebe nke na-arụ ọrụ dị ka igwe anaghị agba nchara. A na-eji mkpụrụ flange na-agbasa ibu a na-etinye na nut n'elu ebe sara mbara ka ọ ghara imebi ihe nrụnye. Ha nwere ike ịbịa n'ụdị serrated ma ọ bụ ndị na-abụghị serrated.

Kpọtụrụ ugbu a gbadaa na pdf

Nkọwa ngwaahịa

Mkpado ngwaahịa

Katalọgụ ngwaahịa

Ngwaahịa	Flange nut
Mechaa	Plain, zinc plated, black, HDG, etc.
Measurement system	Metric, Imperial (inch)
Ngwa	Heavy Industry, Water Treatment, General Industry
Ebe Mmalite	Yongnian, Hebei,China
Brand Name	TYB
Ọkọlọtọ	DIN 6923
Nha	M5-M20
Ihe onwunwe	Carbon ígwè
Tolerance	4H
Ụdị	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Ọkọlọtọ

Flange nut04

Nha	m	S	Dc	Ibu
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.