DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Penerangan ringkas:

Kacang Bebibir Hex ialah kacang hex dengan bahagian bebibir lebar berhampiran satu hujung yang bertindak sebagai pencuci bukan berputar bersepadu. Kacang bebibir digunakan untuk menyebarkan beban yang diletakkan pada nat ke atas kawasan permukaan yang lebih luas untuk mengelakkan kerosakan pada bahan pemasangan. Mereka boleh datang dalam gaya bergerigi atau tidak bergerigi.

HUBUNGI SEKARANG muat turun ke pdf

Butiran Produk

Tag Produk

Katalog produk

produk	Flange nut
Selesai	Plain, zinc plated, black, HDG, etc.
Measurement system	Metrik, Imperial (Inci)
Permohonan	Heavy Industry, Water Treatment, General Industry
Tempat Asal	Yongnian, Hebei,China
Brand Name	TYB
Standard	DIN 6923
Saiz	M5-M20
bahan	Keluli karbon
Tolerance	4H
taip	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Standard

Flange nut04

Saiz	m	S	Dc	Berat badan
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.