DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Qısa təsvir:

Altıbucaqlı flanşlı qoz-fındıqlar bir ucuna yaxın geniş flanş hissəsi olan altıbucaqlı qoz-fındıqlarıdır və inteqrasiya olunmuş fırlanmayan yuyucu rolunu oynayır. Flanşlı qoz-fındıqlar, quraşdırma materialının zədələnməsinin qarşısını almaq üçün qoza qoyulan yükü daha geniş bir səth sahəsinə yaymaq üçün istifadə olunur. Onlar dişli və ya dişsiz üslublarda ola bilər.

İNDİ ƏLAQƏ EDİN pdf-ə endir

Məhsul təfərrüatı

Məhsul Teqləri

Məhsul kataloqu

Məhsul	Flange nut
Bitir	Plain, zinc plated, black, HDG, etc.
Measurement system	Metrik, İmperator (düym)
Ərizə	Heavy Industry, Water Treatment, General Industry
Mənşə yeri	Yongnian, Hebei,China
Brand Name	TYB
Standart	DIN 6923
Ölçü	M5-M20
Material	Karbon polad
Tolerance	4H
Növ	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Standart

Flange nut04

Ölçü	m	S	Dc	Çəki
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.