DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Descripción breve:

Las tuercas hexagonales con brida tienen una brida ancha cerca de un extremo que actúa como una arandela antigiro integrada. Las tuercas con brida distribuyen la carga sobre una superficie más amplia para evitar daños en el material de instalación. Están disponibles con o sin dentado.

CONTACTE AHORA Descargar en PDF

Detalle del producto

Etiquetas de productos

Catálogo de productos

Producto	Flange nut
Finalizar	Plain, zinc plated, black, HDG, etc.
Measurement system	Métrico, Imperial (pulgadas)
Solicitud	Heavy Industry, Water Treatment, General Industry
Lugar de origen	Yongnian, Hebei,China
Brand Name	TYB
Estándar	DIN 6923
Tamaño	M5-M20
Material	Acero carbono
Tolerance	4H
Tipo	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Estándar

Flange nut04

Tamaño	m	S	Dc	Peso
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.