DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Përshkrimi i shkurtër:

Arrat Hex Flange janë dado gjashtëkëndore me një pjesë të gjerë fllanxha pranë njërit skaj që vepron si një rondele e integruar që nuk rrotullohet. Dadot me fllanxha përdoren për të shpërndarë ngarkesën e vendosur në dado në një sipërfaqe më të gjerë për të parandaluar dëmtimin e materialit të instalimit. Ato mund të vijnë në stile të dhëmbëzuara ose jo të dhëmbëzuara.

KONTAKTONI TANI shkarkojeni në pdf

Detajet e produktit

Etiketat e produktit

Katalogu i produkteve

Produkti	Flange nut
Përfundo	Plain, zinc plated, black, HDG, etc.
Measurement system	Metrik, Imperial (Inç)
Aplikimi	Heavy Industry, Water Treatment, General Industry
Place of Origin	Yongnian, Hebei,China
Brand Name	TYB
Standard	DIN 6923
Madhësia	M5-M20
Materiali	Çeliku i karbonit
Tolerance	4H
Lloji	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Standard

Flange nut04

Madhësia	m	S	Dc	Weight
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.