DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

간단한 설명:

육각 플랜지 너트는 한쪽 끝 근처에 넓은 플랜지 부분이 있는 육각 너트로, 통합된 비회전 와셔 역할을 합니다. 플랜지 너트는 설치 재료의 손상을 방지하기 위해 너트에 가해지는 하중을 더 넓은 표면적에 분산하는 데 사용됩니다. 톱니 모양 또는 비톱니 모양 스타일로 제공될 수 있습니다.

지금 연락하세요 pdf로 다운로드

제품 상세 정보

제품 태그

제품 카탈로그

제품	Flange nut
마치다	Plain, zinc plated, black, HDG, etc.
Measurement system	미터법, 영국식(인치)
애플리케이션	Heavy Industry, Water Treatment, General Industry
원산지	Yongnian, Hebei,China
Brand Name	TYB
기준	DIN 6923
크기	M5-M20
재료	탄소강
Tolerance	4H
유형	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

기준

Flange nut04

크기	m	S	Dc	무게
엠3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
엠5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
엠10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.