DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Breve descrición:

As porcas de brida hexagonal son porcas hexagonales cunha porción de brida ancha preto dun extremo que actúa como unha arandela sen xirar integrada. As porcas de brida utilízanse para repartir a carga colocada sobre a porca sobre unha superficie máis ampla para evitar danos ao material de instalación. Poden vir en estilos dentados ou non dentados.

CONTACTO AGORA descargar a pdf

Detalle do produto

Etiquetas de produtos

Catálogo de produtos

Produto	Flange nut
Remate	Plain, zinc plated, black, HDG, etc.
Measurement system	Métrico, Imperial (polgadas)
Aplicación	Heavy Industry, Water Treatment, General Industry
Lugar de orixe	Yongnian, Hebei,China
Brand Name	TYB
Estándar	DIN 6923
Tamaño	M5-M20
Material	Aceiro carbono
Tolerance	4H
Tipo	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Estándar

Flange nut04

Tamaño	m	S	Dc	Peso
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.