DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

ລາຍລະອຽດສັ້ນ:

Hex Flange Nuts ແມ່ນແກ່ນ hex ທີ່ມີສ່ວນກວ້າງຢູ່ໃກ້ກັບປາຍຫນຶ່ງທີ່ເຮັດຫນ້າທີ່ເປັນເຄື່ອງຊັກຜ້າທີ່ບໍ່ມີການຫມຸນແບບປະສົມປະສານ. ແກ່ນ flange ຖືກນໍາໃຊ້ເພື່ອກະຈາຍການໂຫຼດທີ່ວາງໄວ້ເທິງຫມາກແຫ້ງເປືອກແຂງໃນໄລຍະພື້ນທີ່ກວ້າງເພື່ອປ້ອງກັນຄວາມເສຍຫາຍຂອງອຸປະກອນການຕິດຕັ້ງ. ພວກເຂົາສາມາດເຂົ້າມາໃນແບບທີ່ມີເສັ້ນຜ່າກາງຫຼືບໍ່ມີເສັ້ນຜ່າກາງ.

ຕິດຕໍ່ຕອນນີ້ ໂຫຼດລົງເປັນ pdf

ລາຍລະອຽດຜະລິດຕະພັນ

ປ້າຍສິນຄ້າ

ລາຍການຜະລິດຕະພັນ

ຜະລິດຕະພັນ	Flange nut
ຈົບ	Plain, zinc plated, black, HDG, etc.
Measurement system	Metric, Imperial (ນິ້ວ)
ຄໍາຮ້ອງສະຫມັກ	Heavy Industry, Water Treatment, General Industry
ສະຖານທີ່ຕົ້ນກໍາເນີດ	Yongnian, Hebei,China
Brand Name	TYB
ມາດຕະຖານ	DIN 6923
ຂະໜາດ	M5-M20
ວັດສະດຸ	ເຫຼັກກາກບອນ
Tolerance	4H
ປະເພດ	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

ມາດຕະຖານ

Flange nut04

ຂະໜາດ	m	S	Dc	ນ້ຳໜັກ
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.