DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Кыска сүрөттөмө:

Алты бурчтуу фланец гайкалар бир четине жакын кең фланец бөлүгү бар алты бурчтуу гайкалар болуп саналат, ал интеграцияланган айланбаган шайбанын ролун аткарат. Фланец гайкалар орнотуу материалына зыян келтирбөө үчүн гайкага коюлган жүктү кененирээк жер бетине жайылтуу үчүн колдонулат. Алар тиштүү же тиштүү эмес стилде болушу мүмкүн.

АЗЫР БАЙЛАНЫШ pdfге түшүрүү

Продукт чоо-жайы

Продукт тегдери

Продукт каталогу

Продукт	Flange nut
Бүтүрүү	Plain, zinc plated, black, HDG, etc.
Measurement system	Метрикалык, императордук (дюйм)
Колдонмо	Heavy Industry, Water Treatment, General Industry
Келип чыккан жери	Yongnian, Hebei,China
Brand Name	TYB
Стандарт	DIN 6923
Өлчөмү	M5-M20
Материал	Көмүртек болот
Tolerance	4H
Type	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Стандарт

Flange nut04

Өлчөмү	m	S	Dc	Салмагы
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.