DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Deskripsi Singkat:

Mur Flensa Heksagonal adalah mur segi enam dengan bagian flensa lebar di dekat salah satu ujungnya yang berfungsi sebagai ring non-spinning terpadu. Mur flensa digunakan untuk menyebarkan beban yang diletakkan pada mur ke area permukaan yang lebih luas guna mencegah kerusakan pada material pemasangan. Mur ini tersedia dalam model bergerigi atau tidak bergerigi.

HUBUNGI SEKARANG unduh ke pdf

Detail Produk

Label Produk

Katalog produk

Produk	Flange nut
Menyelesaikan	Plain, zinc plated, black, HDG, etc.
Measurement system	Metrik, Imperial (Inci)
Aplikasi	Heavy Industry, Water Treatment, General Industry
Tempat Asal	Yongnian, Hebei,China
Brand Name	TYB
Standar	DIN 6923
Ukuran	M5-M20
Bahan	Baja karbon
Tolerance	4H
Jenis	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Standar

Flange nut04

Ukuran	m	S	Dc	Berat
M3	3.7	5.9	7.6	0.6
M4	4.3	6.8	9.1	1.2
M5	4.8	7.8	10.5	1.7
M6	5.4	9.6	12.95	3.1
M8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
M12	9.9	17.8	23.5	17.9
M16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.