DIN603 carriage bolt round head square neck Featured Image

DIN6923 Hex Flange Nut

Тавсифи кӯтоҳ:

Чормағзҳои шонздаҳӣ чормағзҳои шонздаҳӣ бо як қисми ҳалқаи васеъ дар наздикии як нӯг, ки ҳамчун шустушӯи ҳамгирошудаи чархзананда амал мекунанд. Чормағзҳои фланҷӣ барои паҳн кардани сарбории ба гайка гузошташуда дар майдони васеътар барои пешгирӣ кардани осеб ба маводи насбкунӣ истифода мешаванд. Онҳо метавонанд дар сабкҳои серрат ё ғайридавлатӣ пайдо шаванд.

АКНУН тамос гиред зеркашӣ ба pdf

Тафсилоти маҳсулот

Тегҳои маҳсулот

Каталоги маҳсулот

Маҳсулот	Flange nut
Анҷом	Plain, zinc plated, black, HDG, etc.
Measurement system	Метрикӣ, Империалӣ (дюйм)
Ариза	Heavy Industry, Water Treatment, General Industry
Ҷои пайдоиш	Yongnian, Hebei,China
Brand Name	TYB
Стандарт	DIN 6923
Андоза	M5-M20
Материал	Пӯлоди карбон
Tolerance	4H
Навъи	nut
Port	Tianjin Port

Note: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

Стандарт

Flange nut04

Андоза	m	S	Dc	Вазн
М3	3.7	5.9	7.6	0.6
М4	4.3	6.8	9.1	1.2
М5	4.8	7.8	10.5	1.7
М6	5.4	9.6	12.95	3.1
М8	7	12.9	16.4	6.9
M10	8.6	14.8	.21.6	10.0
М12	9.9	17.8	23.5	17.9
М16	13.6	23.7	31.3	37.6

Product description

(1)What is a hex flange nut?
Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
(2)Do you need lock washer with flange nut?
The flange on a flange nut will turn with the nut whereas a washer often will not. The washer, due to its resistance to turning, thus helps to control wear at the mating surfaces. In effect a washer will protect a surface more than a flange nut. This can be huge if locking washers are also being used on the joint.
(3)How does a flange nut work?
The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut’s pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.