Products

DIN982 Nylon insert lock nut carbon steel zinc plated

Specification Item Nylon insert lock nut Main products DIN982 Size M5-M56 Measurement Metric, Imperial (Inch) Material Carbon Steel:Q195, 1035, 1045,10b21 Grade 4, 6, 8, 10, 12 Heat Treatment Tempering,Spheroidizing,Quenching,Spheroidizing annealing etc. Hardness Mild Carbon Steel: HRC:25-60,HV450-700 Standard GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc Non-standard OEM is available, according to drawing or samples

inquiry detail
DIN571 Hex Head Wood Screw

Short Description:

This is a nail specifically designed for wood, which will be embedded very firmly in the wood. If the wood is not decayed, it is impossible to pull it out, and even if it is forcibly pulled out, it will bring out nearby wood. One more thing to note is that the wood screws must be screwed in with a screwdriver. Do not knock in with a hammer, it will damage the surrounding wood.
The advantage of wood screws is that the consolidation ability is stronger than nailing, and it can be removed and replaced, which does not hurt the wood surface and is more convenient to use.

inquiry detail
DIN603 Carriage Bolt

Our Carriage Bolts are available in a wide range of sizes (M6-M52, 1/4”-2”) and grades (4.8, 6.8, 8.8, 10.9, 12.9), crafted from high-quality carbon steel materials such as Q235, 35k, and 20MNTiB. We adhere to international standards including DIN, ISO, GB, BS, and ASTM. The threads come in coarse, fine, half, and full thread options, and the surface finishes are available in plain, black, zinc-plated, HDG, and Dacromet, offering flexibility to suit different needs.

inquiry detail
DIN985 Nylon Insert Lock Nut

The DIN985 Nylon Insert Lock Nut is made from carbon steel and zinc-plated for corrosion resistance. It features a nylon insert that securely locks the nut in place, preventing loosening due to vibrations, ensuring reliability and stability in mechanical applications.

inquiry detail
DIN933 Hex Bolt

Short Description:

Length is measured from the point at which the head sits flat with the surface, to the tip of the threads. Hex, pan, truss, button, socket cap, and round head screws are measured from right under the head to the end of the threads. Flat head screws are measured from the top of the head to the tip of the threads.

inquiry detail
DIN6923 Hex Flange Nut

Short Description:

Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.

inquiry detail
DIN934 Hex Nut

Short Description:

Notice: Please lets know the Size, quantity, Material or Grade, surface, If it is special and Non-standard products, please supply the Drawing or Photos or Samples to us.

inquiry detail
DIN127 Spring Washer

Short Description:

Spring washer are mainly punched out from iron plates.
Spring washer: after lock, use elastic pad have the effect of locking, and of course to a double nut effect is poor.
Single nut + flat mat, play mat: rely on the nut itself locking force and elastic cushion locking performance, a double nut.

inquiry detail
DIN125 Flat Washer

Short Description:

Flat washers prevent sinking of bearing surfaces,The main role of flat washers is to increase the size of a screw's bearing surface area, and reduce the surface pressure applied on the fastened object.

inquiry detail
DIN975 Thread Rod

Short Description:

A threaded rod is a fastener and functions thanks to the threading, which causes a tightening action from the rotational movement. Threading on a rod allows other fixings like bolts and nuts to easily screw or fasten to it.

inquiry detail
Galvanized Carbon Steel Anchor

Short Description:

1. Drop-in anchors are designed for indoor dry concrete environments,
2. Drop in anchors need an installation tool for each size, the installation video is easy to find on internet.
3. The thread length equals half anchor length, and all sizes of the drop in anchors are fixed if you have a certain thread size.
4. The advantage of the drop-in anchors: nothing protrudes above surface once the anchor is properly installed on the concrete.
5. The drop in anchors just can be used in solid concrete, for it need hammering to install, so do not used in brick or block.
6. The surface of the drop in anchor is always smooth, half and full knurling type are also available for provides greater friction.

inquiry detail
Expansion Wedge Anchor

Our Wedge Anchors/Through Bolts are available in a range of sizes, from M6 to M24 in diameters and 40mm to 400mm in lengths. These anchors are made from high-quality carbon steel Q235, with surface finishes including plain, zinc-plated, black, and HDG. We offer customization options to meet specific needs, with products manufactured according to standards such as DIN, ANSI, ISO, and GB.

inquiry detail

1
2
NEXT
Total: 2

Related News