Kayayyaki

DIN982 nailan saka makullin goro carbon karfe tutiya plated

Ƙayyadaddun Abun Nailan Saka makullin goro Babban samfuran DIN982 Size M5-M56 Measurement Metric, Imperial (Inch) Material Carbon Karfe: Q195, 1035, 1045,10b21 Grade 4, 6, 8, 10, 12 Heat Treatment, da dai sauransu. Hardness Mild Carbon Karfe: HRC: 25-60, HV450-700 Standard GB, DIN, ISO, ANSI / ASTM, BS, BSW, JIS da dai sauransu OEM maras misali yana samuwa, bisa ga zane ko samfurori.

tambaya daki-daki
DIN571 Hex Head Wood Screw

Takaitaccen Bayani:

Wannan ƙusa ne da aka tsara musamman don itace, wanda za'a sanya shi sosai a cikin itacen. Idan itacen bai lalace ba, ba zai yuwu a ciro shi ba, kuma ko da karfi aka ciro shi, zai fito da itacen kusa. Wani abu da ya kamata a lura da shi shine cewa dole ne a dunƙule sukulan katako tare da screwdriver. Kada a buga da guduma, zai lalata itacen da ke kewaye.
Amfanin katako na katako shine ikon ƙarfafawa ya fi ƙarfin ƙusa, kuma ana iya cire shi da maye gurbinsa, wanda ba ya cutar da itace kuma ya fi dacewa don amfani.

tambaya daki-daki
DIN603 Carriage Bolt

Ƙarƙashin Ƙarƙashin Ƙarƙashin Mu suna samuwa a cikin nau'i-nau'i masu yawa (M6-M52, 1/4 "-2") da maki (4.8, 6.8, 8.8, 10.9, 12.9), waɗanda aka ƙera daga kayan ƙarfe mai inganci kamar Q235, 35k, da 20MNTiB. Muna bin ƙa'idodin ƙasa da ƙasa ciki har da DIN, ISO, GB, BS, da ASTM. Zaren sun zo cikin m, mai kyau, rabi, da cikakken zaren zaren, kuma ana samun ƙarewar saman a fili, baƙar fata, da tutiya-plated, HDG, da Dacromet, suna ba da sassauci don dacewa da buƙatu daban-daban.

tambaya daki-daki
DIN985 Nylon Insert Lock Nut

DIN985 Nylon Insert Lock Nut an yi shi daga karfe carbon da zinc-plated don juriya na lalata. Yana fasalta abin saka nailan wanda ke kulle goro a wuri, yana hana sassautawa saboda girgiza, tabbatar da aminci da kwanciyar hankali a aikace-aikacen injina.

tambaya daki-daki
DIN933 Hex Bolt

Takaitaccen Bayani:

Ana auna tsayi daga wurin da kan ke zaune tare da saman, zuwa ƙarshen zaren. Hex, kwanon rufi, truss, maɓalli, hular soket, da madaurin kai ana auna daga dama ƙarƙashin kai zuwa ƙarshen zaren. Ana auna filayen kai daga saman kai zuwa saman zaren.

tambaya daki-daki
DIN6923 Hex Flange Nut

Takaitaccen Bayani:

Kwayoyin Hex Flange kwayoyi ne na hex tare da faffadan yanki mai faɗi kusa da ƙarshen ɗaya wanda ke aiki azaman haɗaɗɗen mai wanki mara juyi. Ana amfani da ƙwayar flange don yada nauyin da aka sanya akan goro a kan wani wuri mai faɗi don hana lalacewa ga kayan shigarwa. Suna iya zuwa a cikin sifofin serrated ko waɗanda ba safai ba.

tambaya daki-daki
DIN934 Hex Nut

Takaitaccen Bayani:

Sanarwa: Da fatan za a sanar da Girman, yawa, Kayan aiki ko Matsayi, saman, Idan samfuran na musamman ne kuma waɗanda ba daidai ba, da fatan za a ba mu Zane ko Hotuna ko Samfurori.

tambaya daki-daki
DIN127 Spring Washer

Takaitaccen Bayani:

Ana fitar da injin wankin bazara daga faranti na ƙarfe.
Mai wanki na bazara: bayan kulle, amfani da kushin roba yana da tasirin kullewa, kuma ba shakka zuwa tasirin kwaya biyu ba shi da kyau.
Kwaya guda ɗaya + lebur tabarma, wasa tabarma: dogara ga goro kanta kulle ƙarfi da na roba makullin kulle wasan, kwaya biyu.

tambaya daki-daki
DIN125 Flat Washer

Takaitaccen Bayani:

Masu wankin lebur suna hana nitsewar wuraren da aka ɗaure,Babban aikin masu wankin lebur ɗin shine ƙara girman yanki mai ɗaukar dunƙule, da rage matsi da ake yi akan abin da aka ɗaure.

tambaya daki-daki
DIN975 Thread Rod

Takaitaccen Bayani:

Sanda mai zare shine mai ɗaurewa kuma yana aiki godiya ga zaren, wanda ke haifar da ɗaukar nauyi daga motsin juyawa. Zare kan sanda yana ba da damar wasu gyare-gyare kamar kusoshi da goro don murƙushewa cikin sauƙi ko ɗaure shi.

tambaya daki-daki
Galvanized Carbon Steel Anchor

Takaitaccen Bayani:

1. Drop-in an ƙera su don wuraren busassun kankare na cikin gida,
2. Drop in anchors yana buƙatar kayan aiki na shigarwa don kowane girman, bidiyon shigarwa yana da sauƙin samun akan intanet.
3. Tsawon zaren yayi daidai da rabin tsayin anka, kuma duk girman digo a cikin anka an gyara su idan kana da wani girman zaren.
4. Amfanin ɗigon ɗigo: babu abin da ke fitowa sama da ƙasa da zarar an shigar da anka daidai akan siminti.
5. Ana iya amfani da digon anchors kawai a cikin siminti mai ƙarfi, don yana buƙatar hammering don shigarwa, don haka kar a yi amfani da bulo ko toshe.
6. The surface na digo a anga ne ko da yaushe santsi, rabin da cikakken knurling nau'in kuma akwai don samar da mafi girma gogayya.

tambaya daki-daki
Expansion Wedge Anchor

Mu Wedge Anchors/Ta hanyar Bolts suna samuwa a cikin kewayon masu girma dabam, daga M6 zuwa M24 a cikin diamita da 40mm zuwa 400mm a tsayi. An yi waɗannan angarorin ne daga ƙaƙƙarfan ƙarfe na carbon Q235, tare da ƙarewar saman da suka haɗa da fili, plated zinc, baki, da HDG. Muna ba da zaɓuɓɓukan gyare-gyare don saduwa da takamaiman buƙatu, tare da samfuran da aka ƙera bisa ga ƙa'idodi kamar DIN, ANSI, ISO, da GB.

tambaya daki-daki

1
2
NA GABA
Jimlar: 2

Masu alaƙa Labarai