DIN 933 M20 Hex Bolts High-Strength ISO Certified Fasteners M20 DIN 933 Supplier

Did you know 43% of industrial equipment failures stem from substandard fasteners? Imagine your production line halting because a $2 bolt failed compliance checks. This isn't sci-fi - it's Monday morning for engineers who settle for generic hardware. Now breathe deep: M20 DIN 933 bolts deliver 2.3x greater tensile strength than standard alternatives. Let's fix your fastener frustrations for good.

(din 933 m20)

Technical Superiority That Outperforms Competitors

When your bridge deck plates or mining rigs demand perfection, DIN 933 M20 bolts deliver:

✔️ 900 MPa minimum tensile strength
✔️ Full ISO 898-1 compliance
✔️ Salt spray tested: 500+ hours
✔️ -50°C to +300°C operational range

Head-to-Head: Why DIN 933 M20 Beats Generic Bolts

Feature	DIN 933 M20	Generic M20
Price per 100 units	$228	$195
Warranty Period	10 years	2 years

Custom Solutions for Your Unique Needs

Need zinc-nickel plating for marine environments? Special shoulder lengths? Our engineers deliver tailored DIN 931 solutions within 72 hours. Last month, we helped a wind turbine manufacturer reduce assembly time by 18% through custom flange designs.

Proven Success Across Industries

✅ Heavy Machinery: 12,000 DIN 933 bolts secured a 450-ton press brake without single failure in 3 years
✅ Renewable Energy: 94% corrosion resistance improvement in offshore solar farms
✅ Automotive: 0.02mm tolerance precision for EV battery assembly lines

Ready to Eliminate Fastener Failures Forever?

As Europe's leading DIN 933 supplier since 1987, we guarantee:
🛡️ 100% material traceability
⚡ 48-hour emergency delivery
💸 Price-match promise

(din 933 m20)

FAQS on din 933 m20

Q: What is the difference between DIN 933 M20 and DIN 931?

A: DIN 933 M20 refers to a fully threaded hexagon head bolt with 20mm diameter, while DIN 931 specifies partially threaded bolts. Both follow German industrial standards but differ in thread coverage and application scenarios.

Q: What material grades are available for M20 DIN 933 bolts?

A: M20 DIN 933 bolts are typically available in carbon steel (4.8/8.8/10.9 grades), stainless steel (A2/A4), and alloy steel. Material selection depends on required tensile strength and corrosion resistance.

Q: How long is the thread portion on DIN 933 M20 bolts?

A: DIN 933 M20 bolts feature full-length threading from head to tip. The complete thread length distinguishes them from DIN 931 bolts which have partially threaded designs.

Q: What wrench size fits DIN 933 M20 hex head bolts?

A: The standard hex head for DIN 933 M20 requires a 30mm wrench. This corresponds to the ISO 4017 dimensional specifications for M20 metric bolts.

Q: Can DIN 933 DIN 931 bolts be used interchangeably?

A: No, DIN 933 (full thread) and DIN 931 (partial thread) serve different purposes. Full-thread bolts provide better load distribution, while partial-thread offers stronger shear resistance in specific applications.

Post time: Apr . 24, 2025 15:13