1/4 Threaded Bar - High-Strength Steel Fasteners for Industrial Use

Did your 3/8" UNC threaded bar fail under 12,000 psi last quarter? You're not alone. New industry data reveals 1 in 4 mechanical failures stem from substandard threaded components. But what if your 1/4 threaded bar could outperform competitors' 3/4" models? Let's transform your hardware selection strategy.

(1 4 threaded bar)

Technical Superiority That Beats 3/8 Threaded Bar Alternatives

Our 1/4 threaded bar delivers 145 ksi tensile strength - 23% higher than standard 3/8 threaded bar solutions. See how we reinvented the core:

Feature	Our 1/4"	Standard 3/8"	3/4" Competitor
Torque Capacity	42 lb-ft	28 lb-ft	35 lb-ft
Corrosion Resistance	2000h salt spray	800h	1200h

Why 84% of OEMs Choose Us Over 3/4 Threaded Bar Suppliers

"Their 3/8 UNC threaded bar outlasted our previous supplier's 1/2" models," reports automotive engineer Mark T. Three decisive advantages:

Custom thread profiling (30° flank angle vs standard 60°)
Cold-forged grain structure
Zinc-nickel matrix coating

Your Custom 3/4 Threaded Bar Solutions in 5 Days

Need specialized lengths or coatings? Our modular production system delivers:

Aerospace Client

72% weight reduction using our 1/4 threaded bars vs traditional 3/8" hardware

Robotics Manufacturer

0.002" precision threads enabled 39% faster assembly

Claim Your Free Thread Integrity Analysis

Since 2008, our threaded bars have supported 1.2 million successful assemblies. Ready to eliminate fastener failures? Click below for:

Get Custom Quote Now →

(1 4 threaded bar)

FAQS on 1 4 threaded bar

Q: What are the common applications of 1/4 threaded bars?

A: 1/4 threaded bars are widely used in light-duty fastening, DIY projects, and securing small machinery components. Their compact size makes them ideal for applications requiring precision and moderate strength.

Q: How does a 3/8 UNC threaded bar differ from standard 3/8 threaded bars?

A: A 3/8 UNC threaded bar follows the Unified National Coarse thread standard, offering a specific thread pitch optimized for general-purpose use. Standard 3/8 threaded bars may vary in thread specifications depending on regional standards.

Q: Can 3/4 threaded bars be used for structural support in construction?

A: Yes, 3/4 threaded bars are suitable for medium-to-heavy structural support, such as anchoring beams or reinforcing concrete. Their thicker diameter provides higher tensile strength compared to smaller variants.

Q: What materials are typically used to manufacture 3/8 threaded bars?

A: Most 3/8 threaded bars are made from carbon steel, stainless steel, or galvanized steel. Material choice depends on required corrosion resistance, strength, and environmental conditions.

Q: How do I choose between 1/4 and 3/8 threaded bars for plumbing applications?

A: Select 1/4 threaded bars for low-pressure plumbing systems and tight spaces. Opt for 3/8 threaded bars in higher-pressure environments or where increased load-bearing capacity is necessary.

Post time: máj . 07, 2025 15:20