DIN603 carriage bolt round head square neck Featured Image

Galvanized Carbon Steel Anchor

Takaitaccen Bayani:

1. Drop-in an ƙera su don wuraren busassun kankare na cikin gida,
2. Drop in anchors yana buƙatar kayan aiki na shigarwa don kowane girman, bidiyon shigarwa yana da sauƙin samun akan intanet.
3. Tsawon zaren yayi daidai da rabin tsayin anka, kuma duk girman digo a cikin anka an gyara su idan kana da wani girman zaren.
4. Amfanin ɗigon ɗigo: babu abin da ke fitowa sama da ƙasa da zarar an shigar da anka daidai akan siminti.
5. Ana iya amfani da digon anchors kawai a cikin siminti mai ƙarfi, don yana buƙatar hammering don shigarwa, don haka kar a yi amfani da bulo ko toshe.
6. The surface na digo a anga ne ko da yaushe santsi, rabin da cikakken knurling nau'in kuma akwai don samar da mafi girma gogayya.

TUNTUBE YANZU sauke zuwa pdf

Cikakken Bayani

Tags samfurin

Kataloji na samfur

Ƙayyadaddun bayanai

Samfura	Sauke a anga
Nau'in	ba tare da knurling / rabin knurling / biyu knurling
Kayan abu	Karfe Karfe: 1010,1035,1045
Daraja	4.8, 5.8, 6.8, 8.8, 10.9, 12.9
Gama	Plain, Zinc Plated (Clear/Blue/Yellow/Black), Black oxide, HDG da sauransu.
Zare	UNC, UNF, UEF, UN, UNS
Daidaitawa	ISO, DIN, ANSI, JIS, BS da marasa daidaito
Misali	Samfurori duk kyauta ne.
Takaddun shaida	ISO9001, CE, SGS, BV
Amfani	1. Farashin farashi; 2. OEM sabis samuwa
Shiryawa	akwatin + kartani + pallet na itace ko na musamman
Sharuɗɗan biyan kuɗi	FOB, CIF, CFR ko wasu.
Hanyar bayarwa	ta teku, ta iska ko ta sabis na faɗakarwa
Lokacin Jagora	7-15 aiki kwanaki bayan oda tabbatar
Aikace-aikace	Tsarin Karfe; Ƙarfe Ƙarfe; Hasumiyar Mai & Gas&Pole Wind Energy; Injin Injiniya; Mota: Aikin Gida da dai sauransu.
Bayanan kula	Ana iya yin ƙayyadaddun ƙayyadaddun bayanai da alamomi bisa ga buƙatun abokan ciniki;

Cikakkun bayanai

Drop in anchor

Girman

Inch Size	1/4″	3/8″	1/2″	5/8″	3/4″
Girman Zaren	1/4″ – 20	3/8″ – 16	1/2″ – 13	5/8″ – 11	3/4″ – 10
Girman Diamita na waje/Bit	3/8″	1/2″	5/8″	7/8″	1″
Min. Ramin Diamita	7/16″	9/16″	11/16″	1″	1-1/8″
Sauke Cikin Anchor Tsawon	1″	1-9/16″	2″	2-1/2″	3-3/16″

Girman Ma'auni	M6	M8	M10	M12	M16	M20
Girman Zaren	M6 – 1	M8 – 1.25	M10 – 1.5	M12 – 1.75	M16 – 2	M20 – 2.5
Girman Diamita na waje/Bit	8mm ku	10 mm	12mm ku	16mm ku	20mm ku	25mm ku

Yadda ake amfani da shi?

(1) Yi amfani da ramuka madaidaiciya don haƙa ramukan diamita da zurfin daidai;
(2) Yi amfani da na'urar busa soot don share toka har sai ramin bai cika zubewa ba;
(3) Saka anka a cikin rami;
(4) Yi amfani da guduma don buga ainihin ciki tare da sanda don faɗaɗa takardar faɗaɗa;
(5) Maɗa a cikin ƙusoshin hex don kammala anga.
P.s. Electric hammer, drills, soot blowers, hammer and rod will be used during the operation.

Idan kuna sha'awar samfuranmu, zaku iya zaɓar barin bayanin ku anan, kuma za mu tuntube ku nan ba da jimawa ba.

Ku rubuta sakonku anan ku aiko mana

Masu alaƙa Kayayyaki

Masu alaƙa Labarai